Milwaukee M18 vs M28: The Real Difference

Milwaukee M18 vs M28 explained: voltage labels, pack weight, battery size, and why the lower-voltage platform won. Guidance for new buyers and M28 owners alike.

Verified 2026-10-29 Published 2026-10-29

Milwaukee M28 is the older 28-volt platform. Milwaukee M18 is the current 18-volt platform, and it won. The surprise is that M18 won despite the smaller voltage number, because voltage alone never determined which platform got new tools, better motors, and a larger battery range. For a new buyer, M18 is the clear choice. For an owner with working M28 tools, the answer is narrower: keep using them, but do not expand the collection.

The methodology behind these comparisons is documented at methodology. Related reading: M18 battery compatibility, M18 FUEL vs DeWalt FLEXVOLT, DeWalt 20V MAX vs 60V FLEXVOLT, and DeWalt FLEXVOLT battery compatibility.

What the numbers actually mean

Voltage labels in cordless tools describe a pack’s cell arrangement, and the headline number is usually the maximum, not the working voltage. The M28 3.0Ah pack uses 14 cells in a 7-series, 2-parallel (7S/2P) configuration, per manuals.plus specifications (Source: manuals.plus M28 3.0Ah, verified 2026-10-29). Seven cells at 4.0 volts maximum give the 28-volt label. Seven cells at about 3.6 volts under load give roughly 25.2 volts nominal. Multiply that nominal figure by 3.0 amp-hours and the result is about 76 watt-hours, which matches the pack’s rated 76 watt-hours.

M18 follows the same logic with five cells in series. Five cells at 4.0 volts maximum would read 20 volts, which is why a rival brand labels an equivalent pack 20V MAX. Milwaukee labels the working figure: 18 volts nominal. An M18 XC5.0 pack at 18 volts and 5.0 amp-hours is rated at 90 watt-hours (Source: Northern Tool M18 XC5.0 listing, verified 2026-10-29). Watt-hours, not the headline voltage, is the number that predicts runtime when tools are comparable.

That single comparison reframes the whole question. A buyer who reads 28 as bigger than 18 and stops there will miss the fact that the common M28 pack holds less energy than the common M18 extended-capacity pack.

Platform at a glance

Milwaukee M28Milwaukee M18
Nominal platform voltageAbout 25.2V (28V maximum label)18V nominal
Representative packREDLITHIUM 3.0Ah, 48-11-2830REDLITHIUM XC5.0, 48-11-1850
Rated energy76Wh90Wh
Pack weight (representative)2.35 lb (M28 3.0Ah)726 g, about 1.6 lb (M18 XC5.0)
Cell configuration14 cells, 7S/2P5 cells in series (standard M18 layout)
Battery warranty3 years (serial C71); older serial A71: 2 years plus 3 years prorated3 years (XC5.0)
Current tool developmentNo new-tool development reported; some tools listed as no longer availableActive, with more than 250 tools per the XC5.0 listing
Cross-platform battery useNone with M18None with M28

Sources: manuals.plus M28 3.0Ah specifications and Northern Tool M18 XC5.0 listing, both verified 2026-10-29; SlashGear M28 overview, verified 2026-10-29; ProToolReviews battery warranty listing, verified 2026-10-29.

Battery head to head

PackVoltage and capacityWeightCharge timeNotes
M28 REDLITHIUM 3.0Ah (48-11-2830)28V maximum, 3.0Ah, 76Wh998 gAbout 1 hour on the M28 charger 48-59-2819 (28V/3.5A output)Onboard fuel gauge
M28 B5 5.0Ah28V, 5.0Ah1.026 kg90 minutes on the M28 C chargerREDLINK overload protection and individual cell monitoring, per Milwaukee EU
M18 REDLITHIUM XC5.0 (48-11-1850)18V, 5.0Ah, 90Wh726 gVaries by charger; pack is compatible with all M18 chargers in the systemPowers more than 250 M18 tools, per the Northern Tool listing

Sources: manuals.plus M28 3.0Ah specifications, Milwaukee EU M28 B5 fact tag, and Northern Tool M18 XC5.0 listing, all verified 2026-10-29.

Two details deserve emphasis. First, the M28 B5 5.0Ah pack exists, so M28 is not short of capacity in absolute terms. It is short of it in a pack a person wants to carry all day: over a kilogram for the battery alone. Second, charging is not a differentiator. The M28 3.0Ah pack charges in about an hour on its dedicated charger, and the B5 takes 90 minutes, both ordinary figures that no buyer should treat as a reason to pick a platform (Sources: manuals.plus M28 3.0Ah specifications, verified 2026-10-29; Milwaukee EU M28 B5 fact tag, verified 2026-10-29).

Why M18 overtook M28 despite lower voltage

The decisive factor was development, not physics. Milwaukee kept building the M18 roster while M28 stopped gaining new tools. One owner who made the switch put the mechanism plainly: Milwaukee was not developing new tools for the older M28 line, even though support continued, and the newer M18 tools produced more torque than the older M28 tools despite the lower voltage (Source: Forestry Forum discussion, verified 2026-10-29). Motors, gearing, and electronics improved across a generation gap. A voltage number from an earlier generation cannot capture that.

Ecosystem size then compounded the lead. The M18 XC5.0 listing states the pack powers more than 250 Milwaukee M18 cordless tools (Source: Northern Tool M18 XC5.0 listing, verified 2026-10-29). Every additional M18 tool a buyer owns makes the next M18 purchase cheaper, because the batteries and chargers already exist. M28 never built that flywheel, and once it stalled, each year widened the gap in available tools rather than closing it.

Weight finished the argument for daily users. The M28 3.0Ah pack is roughly 50 percent heavier than the M18 XC5.0 pack while holding less energy, and the tools it powers were built around that bulk (Sources: SlashGear M28 overview, verified 2026-10-29; Northern Tool M18 XC5.0 listing, verified 2026-10-29). A platform can survive being heavy if it is the only way to get a job done. M18 removed that justification for most drilling, driving, cutting, and grinding work.

Myth vs fact

Myth: 28 volts means a stronger tool than any 18-volt tool.

Fact: tool output depends on motor design, gearing, current delivery, and battery energy, not the headline voltage alone. The M28 3.0Ah pack holds 76 watt-hours against 90 watt-hours for the M18 XC5.0, and owners report newer M18 tools out-torquing older M28 tools (Sources: manuals.plus M28 3.0Ah specifications, verified 2026-10-29; Northern Tool M18 XC5.0 listing, verified 2026-10-29; Forestry Forum discussion, verified 2026-10-29).

Myth: Milwaukee formally killed M28, so existing tools are about to stop working.

Fact: no official discontinuation announcement was found in the sources for this guide, and working tools do not expire on a press release. Availability is the real constraint: some M28 tools are listed as no longer available and most listed vendors are out of stock, which makes replacement batteries and chargers the binding limit over time (Source: SlashGear M28 overview, verified 2026-10-29).

Myth: an adapter can make M18 and M28 batteries interchangeable.

Fact: the packs are not interchangeable, and the two platforms differ in voltage, size, and battery management. A physical adapter cannot supply the cell monitoring and communication a tool expects from its own platform, and forcing the issue risks tool damage and voided warranty coverage (Source: SlashGear M28 overview, verified 2026-10-29).

Myth: M28 must be better for heavy work because the packs are bigger.

Fact: bigger here means bulk, not energy. The M28 3.0Ah pack measures 4.0 x 7.0 x 7.13 inches, against 4.5 x 3.1 x 2.8 inches for the M18 3.0Ah pack in the same comparison, and it weighs 2.35 lb against 1.54 lb (Source: SlashGear M28 overview, verified 2026-10-29). Heavy packs tax wrists and shoulders on overhead and extended work, which is exactly where owners notice the difference first.

What owners report

Forum reports are anecdotes, not measurements, and they are included here as owner experience rather than specification. Their pattern is consistent across three separate discussions, which is what makes them worth noting.

“A few years back I moved into the Milwaukee M18 series and found that even though the voltage was lower, they were producing more torque than my older M28 tools. I did this because Milwaukee was not developing new tools for the older M28 line - even though they were still supporting it.” (scsmith42, Forestry Forum)

One owner reported buying a full set of M28 tools around 2004 and still using them, calling them reliable and powerful but heavy. (rScotty, paraphrased, TractorByNet)

The same owner added the detail that decides many purchases: “More recently, we also have a little M18 drill and M18 work light. Both get a lot of use when I don’t want to lug an M28 monster.” (rScotty, TractorByNet)

“I do think the 28 milwaukee stuff is a bit large; the new Makita 18 Lithium Ion tools are sweet - nice size and weight. Aside from doing much ripping with the circular saw - I find that my 18 volt tools do just about everything I need - I’d appreciate less weight more than more power at this point.” (JT, Fine Homebuilding forum)

The contrarian read on those reports is worth stating directly. M28’s failure was not that its tools were weak. Owners call them reliable and powerful, two decades on in one case. M28 lost because reliability without new tools, lighter packs, and a growing roster is a dead end for a buyer choosing a system, even while it remains a perfectly good reason to keep a tool that already works.

Verdict: M28 is the loser for new buyers

This comparison has a decisive loser, and it is M28 as a buying decision. A new buyer who chooses M28 in 2026 buys into a platform with no reported new-tool development, shrinking retail availability, heavier packs, and no path to M18 batteries. That is a bad trade even before price enters the picture.

M18 wins on every criterion that governs a platform purchase: current tool roster, battery range, pack weight per watt-hour, charger ecosystem, and future availability. The M18 FUEL Oscillating Multi-Tool 2836-21 illustrates the current end of that roster: it accepts all M18 batteries, carries a 5-year tool warranty and a 3-year battery warranty, and runs a POWERSTATE brushless motor at 10,000 to 20,000 oscillations per minute with a 4.2-degree oscillation angle (Source: Milwaukee 2836-21 product page, verified 2026-10-29). No M28 equivalent purchase offers that combination of current warranty, current motor technology, and a battery system shared with hundreds of other tools.

Price does not rescue M28. Reported Home Depot listings from August 2025 put the M28 3.0Ah pack at $186.19, the M28 charger at $72.09, and an M28 1/2-inch Right Angle Drill (tool only) at $257.49, but those figures were reported in August 2025 and were not re-verified as live prices for this guide, so they should not be used as a current shopping comparison (Source: SlashGear M28 overview, verified 2026-10-29). What matters is the direction: scarce packs and chargers do not get cheaper as a platform winds down, while M18 packs benefit from volume and frequent promotion.

If you already own M28

Keep the tools. Replace batteries and chargers while they can still be found, and check the serial number before assuming warranty coverage: the M28 REDLITHIUM 48-11-2830 carries a 3-year warranty on serial C71 units, while older serial A71 units carry 2 years plus 3 years prorated (Source: ProToolReviews battery warranty listing, verified 2026-10-29). For the M18 XC5.0, the warranty is 3 years (Source: Northern Tool M18 XC5.0 listing, verified 2026-10-29).

Migrate tool by tool, not all at once. Replace the most-used tool first, usually the drill driver, and let the M28 tools that still work keep working until a battery, charger, or tool failure forces the next replacement. At that point, buy the M18 replacement and start the battery collection that future tools will share.

One caution applies to the migration itself. Selling a full M28 set rarely recovers the battery and charger investment, because the next buyer faces the same shrinking availability. Price a sale on the tools, not on the system, and keep at least one working charger until the last M28 tool leaves the shop.

Limitations and testing disclosure

No physical testing was performed for this guide. All specifications come from manufacturer pages and the dated secondary sources listed in the frontmatter, and no tool was measured, torn down, or run through a timed cutting or drilling trial for this article. Torque comparisons from owners are reported as owner experience, not as laboratory results, and the single owner report of M18 tools out-torquing older M28 tools reflects that owner’s tools and work, not a controlled comparison across models.

Availability claims carry a specific limit. The finding that no official Milwaukee discontinuation announcement was located is a statement about the sources reviewed for this guide, not proof that no announcement exists elsewhere. Retail availability changes, and the August 2025 reported prices cited above were not re-verified as live prices on the publication date. Battery dimensions and weights come from the cited listings and compliance data, and different listings round or measure packs differently, so small discrepancies between sources are expected. Organization byline: PowerToolBench.

Frequently asked questions

What is the difference between Milwaukee M18 and M28?
M28 is Milwaukee's older 28-volt platform and M18 is the current 18-volt platform. The packs are not interchangeable, M28 tools are larger and heavier, and Milwaukee has concentrated new tool development on M18. A new buyer in 2026 should buy M18. An owner with working M28 tools can keep using them while batteries and chargers remain available (Sources: SlashGear M28 overview, verified 2026-10-29; Milwaukee 2836-21 product page, verified 2026-10-29).
Is 28V more powerful than 18V?
Higher voltage alone does not settle it. An M28 3.0Ah pack is rated at 76 watt-hours, while an M18 XC5.0 pack is rated at 90 watt-hours, because capacity matters as much as voltage. Newer M18 motors and electronics also changed the comparison: one owner who switched reported that lower-voltage M18 tools produced more torque than older M28 tools (Sources: manuals.plus M28 3.0Ah specifications, verified 2026-10-29; Northern Tool M18 XC5.0 listing, verified 2026-10-29; Forestry Forum, verified 2026-10-29).
Can I use an M18 battery in an M28 tool, or an M28 battery in an M18 tool?
No. M28 and M18 batteries are not interchangeable, and the packs differ in size, rail geometry, and voltage. Do not force a pack onto a tool from the other platform, and do not rely on an adapter to bridge a voltage and battery-management gap the tool was never designed for (Source: SlashGear M28 overview, verified 2026-10-29).
Is Milwaukee M28 discontinued?
No official Milwaukee discontinuation announcement was found in the sources for this guide. Milwaukee's site lists some M28 tools as no longer available, most listed vendors are out of stock, and no M28 listing was found on Ohio Power Tool in this search, whose platform page lists only M12 and M18/M18 FUEL as core platforms. That pattern points to a platform in runoff rather than active development, even without a formal announcement (Source: SlashGear M28 overview, verified 2026-10-29).
Which battery lasts longer, an M28 3.0Ah or an M18 5.0Ah?
The M18 XC5.0, at 90 watt-hours, holds more energy than the M28 3.0Ah pack at 76 watt-hours. In equivalent work, the larger watt-hour figure is the better runtime predictor. The M28 B5 5.0Ah pack is a different case: at 28 volts and 5.0 amp-hours it is a larger, heavier pack, weighing 1.026 kg per Milwaukee EU data (Sources: Northern Tool M18 XC5.0 listing, verified 2026-10-29; manuals.plus M28 3.0Ah specifications, verified 2026-10-29; Milwaukee EU M28 B5 fact tag, verified 2026-10-29).
How heavy is the difference in practice?
Substantial. The M28 3.0Ah pack measures 4.0 x 7.0 x 7.13 inches and weighs 2.35 lb, against 4.5 x 3.1 x 2.8 inches and 1.54 lb for the M18 3.0Ah pack in the same comparison. The M18 XC5.0 pack weighs 726 g (about 1.6 lb) per compliance data. Owners describe the same trade-off in plainer terms: M28 tools are reliable and powerful, but heavy (Sources: SlashGear M28 overview, verified 2026-10-29; Northern Tool M18 XC5.0 listing, verified 2026-10-29; TractorByNet, verified 2026-10-29).
Should I sell working M28 tools and switch to M18?
Only if the cost of replacement batteries, chargers, or a failed tool forces the decision, or if a needed tool simply does not exist on M28. A working M28 drill or saw still drills and saws. The switch makes sense when the next purchase is a new tool anyway, because that purchase starts a battery system with a current roster, current chargers, and a future (Sources: SlashGear M28 overview, verified 2026-10-29; Milwaukee 2836-21 product page, verified 2026-10-29).

Related comparisons & guides